Описание оборудования | |
---|---|
WIS transmitter secondary (RX) | |
General specifications | |
Installation | non-flush |
Transfer distance | 0 ... 7 mm |
Transfer direction | 8 signale from secondary side to primary side ; power from primary side to secondary side |
Time delay before availability | 160 ms |
Input | |
Number/Type | 8 / digital inputs |
Input type | high-active |
Input signal | hИли отправьте нам запрос наw level : -1 ... 5 V |
Input voltage | -1 ... 36 V , reverse polarity protected |
Input current | < 4.5 mA per input |
Signal frequency | 500 Hz |
Output | |
Number/Type | 1 / voltage output |
Output voltage | 24 V ± 5 % |
Transmission power | continous output power (max. 7 mm distance) 12 W |
Short-circuit protection/overload | short circuit protection , over temperature protection |
Residual ripple | max. 480 mV |
Compliance with standards and directives | |
Directive conformity | |
Approvals and certificates | |
CCC approval | CCC approval / marking not required for products rated ?36 V |
Ambient conditions | |
Ambient temperature | -20 ... 55 °C (-4 ... 131 °F) |
Storage temperature | -20 ... 100 °C (-4 ... 212 °F) |
Mechanical specifications | |
Connection type | L = 300 mm ± 50 mm cable with Female connector ; 12-pin |
Housing material | brass, nickel-plated |
Sensing face | LCP |
Degree of protection | IP67 |
Installation | screw mounting |
Mass | 150 g |
General information | |
Note | The mounting conditions are described in an extra document. See on product page in the internet. |
8 (029) 555-8-000 | |
8 (044) 555-8-000 | |
8 (017) 255-8-000 |