Attribute | 485EPS1H | 485EPS1S | 485EPS1T | 485EPS2H | 485EPS2N | 485EPS2S | 485EPS2T |
---|---|---|---|---|---|---|---|
Electrical data | |||||||
Operating voltage min. | 19.2 V DC | 19.2 V DC | |||||
Operating voltage max. | 28.8 V DC | 28.8 V DC | |||||
Power consumption | 3 W | 3 W | |||||
LED display | No | No | |||||
encoder interface | HTL | sin/cos | TTL | HTL | – | sin/cos | TTL |
Encoder connections | RJ45 | – | RJ45 | ||||
Rated insulation voltage encoder | 250 V | – | 250 V | ||||
Overvoltage category encoder | II | – | II | ||||
Nominal pulse voltage encoder | 4 kV | – | 4 kV | ||||
Max. number of encoders | 1 | 2 | – | 2 | |||
Max. frequency of encoder | 300 kHz | 500 kHz | 300 kHz | – | 500 kHz | ||
Adjustable threshold range encoder | 1 Hz - 450 kHz | – | 1 Hz - 450 kHz | ||||
Initiators category | PNP/NPN - 3/4 Drahte | PNP/NPN - 3/4 Drahte | |||||
Initiators connections | via connection terminals | via connection terminals | |||||
Adjustable threshold range initiators | 1 Hz - 4 kHz | 1 Hz - 4 kHz | |||||
Max. number of initiators | 2 | 2 | |||||
Max. frequency of initiators | 5 kHz | 5 kHz | |||||
Max. number of axes | 2 | 2 | |||||
Standstill/overspeed gap | > 10 Hz | > 10 Hz | |||||
Min. gap between thresholds | > 5 % | > 5 % | |||||
Safety-related characteristics | |||||||
PL acc. to EN ISO 13849-1 | e | e | |||||
SIL acc. to IEC 61508 | 3 | 3 | |||||
SIL CL acc. to IEC 62061 | 3 | 3 | |||||
PFHD according to IEC 61508 | 6,7 x 10-9 1/h | 7,9 x 10-9 1/h | 7,1 x 10-9 1/h | 7,4 x 10-9 1/h | 6 x 10-9 1/h | 9,9 x 10-9 1/h | 8,2 x 10-9 1/h |
Operating life | 20 Tm | 20 Tm | |||||
Category acc. to EN ISO 13849-1 | 4 | 4 | |||||
Mechanical data | |||||||
Dimensions | 108 x 22,5 x 114,5 mm (H/B/T) | 109 x 22,5 x 114,5 mm (H/B/T) | 108 x 22,5 x 114,5 mm (H/B/T) | ||||
Material information | |||||||
Housing material |